Cooled Photodiode 1-30um | SIMTRUM Photonics Store

Cooled Photodiode 1-30um

Overview Specifications & Model Guide Spectral Graph Order Now!

MCT12 Dewar-Cooled Photodiode (2-12µm)

The MCT12 cryogenically cooled mercury cadmium telluride takes high responsivity into the LWIR. Housing a 2x2mm active area MCT photodiode (2-12µm), the DH_MCT12 is operated in the photoconductive mode with the dedicated 475 ultra-low noise pre-amplifier module. Using an optically chopped input, the signal generated by this detector is best measured by the 496 DSP lock-in amplifier. Operation in the cryogenic mode offers ultimate sensitivity and low noise performance.

Core benefits

ü Excellent MWIR-LWIR performance

ü Spectral coverage 2-12µm

ü High responsivity

ü Low noise

Features

w Dewar-cooled, mercury cadmium telluride

detector

w 2x2mm diameter active area

w 8 hour Dewar hold time

w Operated in AC mode

w Suitable for free standing applications

w Recommended for use with 400 series

detection electronics

INSB Dewar-Cooled Photodiode (1-5.5μm)

The INSB cryogenically cooled indium antimonide detector offers the best performance to 5.5µm. Housing a 3mm active area indium antimonide photodiode (1-5.5µm), the DH_INSB is operated in the photovoltaic mode. Using an optically chopped input, the signal generated by this detector is best measured in using the 477 trans-impedance pre-amplifiers followed by the 496 DSP lock-in amplifier.

Core benefits

ü Excellent SWIR-MWIR performance

ü Spectral coverage 1-5.5µm

ü High responsivity

ü Low noise

Features

w Dewar-cooled, Indium Antimonide detector

w 3mm diameter active area

w 8-hour Dewar hold time

w Operated in AC mode

w Suitable for free standing applications

w Recommended for use with 400 series

detection electronics

PBSE_TE Cooled Photodiode (1-5µm)

The PBSE_TE cooled lead selenide photodiode offers wide spectral responsivity to 5µm and the convenience of thermo-electric cooling. Housing a 3x3mm active area lead selenide photodiode, the dh_pbse_te IS Operated in the photoconducive mode with the 215 high voltage supply whilst temperature control isensured by the CPS1M.

Using an opticallychopped input, the signal generated by this detector is best measured in using the 477 trans-impedance pre-amplifiers followed by the 496 DSP lock-in amplifier.

Core benefits

ü Covers the range of InSb with convenience

of thermo-electric cooling

ü Spectral coverage 1-5µm

Features

w Houses lead sulphide photodiode

w 3x3mm active area

w Operated in AC mode

w Suitable for free standing applications

w Recommended for use with 400 series

detection electronics

PBS_TE Cooled Photodiode (1-3µm)

The DH_PBS_TE cooled lead sulphide photodiode offers high responsivity to 3µm and the convenience of thermo-electric cooling. Housing a 3x3mm active area lead sulphide photodiode, the DH_PBS_TE is operated in the photoconductive mode with the 215-voltage supply whilst temperature control is ensured by the CPS1M.

Using an optically chopped input, the signal generated by this detector is best measured in using the 477 trans-impedance pre-amplifiers followed by the 496 DSP lock-in amplifier.

Core benefits

ü Extends beyond the range of InGaAs

detectors

ü Convenience of thermo-electric cooling

ü Spectral coverage 1-3µm

Features

w Houses lead selenide photodiode

w 3x3mm diameter active area

w Operated in AC mode

w Suitable for free standing applications

w Recommended for use with 400 series

detection electronics

DH_PY Pyroelectric Detector (1-30µm)

The PY DLATGS pyroelectric detector offers an exceptionally wide responsivity range, reaching parts of the infrared for which no photon detectors are available.

Housing a 2x2mm active area pyroelectric detector fitted with a KRS5 window (1-30µm), the PY includes an integrated impedance matching amplifier. The amplifier is powered by the DH_PY_PSU module. The signal generated is best measured in using the 496 DSP lock-in amplifier.

Core benefits

ü Extremely wide range of response

ü Matched amplifier for optimal operation

ü Easy implementation with 496 DSP lock-in

amplifier

Features

w Housed pyroelectric sensor (KSR5 window)

and integrated amplifier

w Amplifier power supplied by PY_PSU module

w Operated in AC mode

w Suitable for free standing applications

w Recommended for use with 400 series

detection electronics

Please check the table below for individual specifications tied to individual products.

Products Brochure Links: MCT12 | INSB | PBSE_TE | PBS_TE | PY

Detector Model	MCT12 Dewar-Cooled Photodiode (2-12µm)	INSB Dewar-Cooled Photodiode (1-5.5μm)	PBSE_TE Cooled Photodiode (1-5µm)	PBS_TE Cooled Photodiode (1-3µm)	PY Pyroelectric Detector (1-30µm)
Material	Mercury cadmium telluride	Indium antimonide	Lead Selenide	Lead Sulphide	Deuterated lanthanum α-alanine doped triglycine sulphate (DLaTGS)
Active area	2x2mm	3mm diameter	3x3 mm	3x3 mm	2x2mm
Spectral response range	2-12μm	1-5.5μm	1-5µm	1000-3000nm	0.6-40µm
Operating mode	Photoconductive	Photovoltaic	Photoconductive	Photoconductive	Pyroelectric
Shunt resistance (typ.)	100Ω	>200kΩ	0.5-3MΩ	0.7MΩ	nil
Peak wavelength (typ.)	10µm	3.8µm	2600nm	2600nm	nil
Field of view	60°	60°	nil	nil	nil
Detectivity	> 5 x 1010 cm.Hz½.W-1	5.3 x 10-13W.Hz-1/2	nil	nil	nil
Peak responsivity (typ.)	nil	nil	2 x 104 V.W-1	2 x 105 V.W-1	1750 V.W-1
NEP	nil	nil	<1.3 x 10-13 W.H-1/2	<1 x 10-14 W.H-1/2	nil
Maximum cooler current	nil	nil	1.25A	1.25A	nil
Recommended chopping frequency	nil	nil	175/ 225 Hz	175/ 225 Hz	15 Hz
Operating temperature	nil	nil	-10°C	-10°C	nil
Max. operating temperature	nil	nil	-20 to +60°C	-20 to +60°C	-20 to +55°C
*D (typ.)**	nil	nil	nil	nil	1.15x109 cm√Hz.W-1
Window material	nil	nil	nil	nil	KRS5
Connector	SMA	SMA	BNC	BNC	Amphenol
Compatibility	Interface plate with 4 x M3 clearance holes	Interface plate with 4 x M3 clearance holes	Four M3 clearance holes	Four M3 clearance holes	Four M3 clearance holes
Dimensions	64L x 64W x 133H (mm)	64L x 64W x 133H (mm)	nil	nil	nil
Dewar hold time (hours)	nil	> 8 (with liquid Nitrogen)	nil	nil	nil

MCT12 Dewar-Cooled Photodiode (2-12µm)

INSB Dewar-Cooled Photodiode (1-5.5μm)

PBSE_TE Cooled Photodiode (1-5µm)

PBS_TE Cooled Photodiode (1-3µm)

PY Pyroelectric Detector (1-30µm)

We are here for you!


Drop us an email at info@simtrum.com to get the Best Price today.		Want more technical information? Click Here for the professional Customized System/ Solutions.


Don't have time to search the products one by one? No worries. you can download the full range of SIMTRUM Product Line Cards. Click it now.		Want to stay closer to the Market Dynamics and Technological Developments? Just take 5 seconds to Sign In as a member of SIMTRUM, we will bring you the most up-to-date news. (Sign in button on the top right of the screen).

Search Reset

	Availability	Reference Price (USD)
MCT12 Dewar-Cooled Photodiode (2-12µm) 2x2mm mercury cadium telluride photodiode, Wavelength range 2-12um	In Stock	Request for quote
INSB Dewar-Cooled Photodiode (1-5.5μm) 3mm diameter indium antimonide photodiode, Wavelength range 1-5.5um	In Stock	Request for quote
PBSE_TE Cooled Photodiode (1-5µm) 3x3mm thermo-electrically cooled lead selenide photodiode, Wavelength range 1-5um	In Stock	Request for quote
PBS_TE Cooled Photodiode (1-3µm) 3x3mm thermo-electrically cooled lead sulfide photodiode, Wavelength range 1-3um	In Stock	Request for quote
PY Pyroelectric Detector (1-30µm) 2x2mm DLATGS sensor, Wavelength range 1-30um	In Stock	Request for quote

PY Pyroelectric Detector (1-30µm) - Parameter

PBS_TE Cooled Photodiode (1-3µm) - Parameter

PBSE_TE Cooled Photodiode (1-5µm) - Parameter

INSB Dewar-Cooled Photodiode (1-5.5μm) - Parameter